DEVELOPMENT AND VALIDATION OF ANALYTICAL METHOD FOR ESTIMATION OF ARIPIPRAZOLE IN SWAB SAMPLES ON PHARMACEUTICAL MANUFACTURING EQUIPMENT SURFACES FOR CLEANING VALIDATION
DOI:
https://doi.org/10.22159/ijpps.2017v9i5.13788Keywords:
Residual estimation, swab sampling, Cleaning validation, Aripiprazole, UV methodAbstract
Objective: To validate simple analytical method and its application in the determination of residual aripiprazole in production area equipment and to confirm the efficiency of cleaning procedure.
Methods: The swab sampling and UV method for residual estimation of aripiprazole in swab samples from equipment surfaces after manufacturing of three consecutive batches of aripiprazole 10 mg uncoated tablets were developed and validated.
Results: The swab sampling method was developed and validated in order to obtain the suitable recovery (>90%). The swabs were saturated with acetonitrile. The UV method was developed using UV-Vis spectrophotometer at 255 nm. The calibration curve was linear (r2 =1.0000) over a concentration range of 1-30 µg/ml. The LOD and LOQ were 0.43 µg/ml and 1.32µg/ml, respectively. No interference from swab solution was observed and samples were stable for 24h. The determined concentration varying from 1.00-5.687µg/swab was well below the calculated limit of contamination i.e., 24.2µg/swab or 24.2 µg/25 cm2.
Conclusion: The results obtained from cleaning procedure confirmed that the proposed procedure was able to remove aripiprazole from equipment surfaces below the value of 10 ppm criteria. So the proposed validated UV method with appropriate swab wipe procedure could be applicable for cleaning validation on residues of aripiprazole.
Downloads
References
Agalloco J. Points to consider in the validation of equipment cleaning procedures. J Pharm Sci Tech 1992;46:168-75.
Venugopal S. Designing of cleaning validation program for active pharmaceutical ingredients. World J Pharm Res 2014;3:3819-44.
FDA. Guide to inspections of validation of cleaning processes; 1993.
Leblan C, Destin A. Establishing scientifically justified acceptance criteria for cleaning validation of finished drug products. AAPS PharmSciTech 1998;22:136-48.
Appleby C. Principal of cleaning validation. Global Quality Operation; 2010. p. 1-24.
Lodhi B, Padamwari P, Patel A. Cleaning validation for the pharmaceuticals, biopharmaceuticals, cosmetic and nutraceuticals industries. J Innovations Pharm Biol Sci 2014;1:27-38.
Grobin AW. Cleaning verification/validation of pharmaceutical manufacturing equipment from a laboratory perspective. Southern California Pharmaceutical Discussion Group; 2013.
Mollah AH. Cleaning validation of biopharmaceutical manufacturing at Genentech, Inc. Part 2. Biopharm; 2008. p. 21.
Pawar HA, Banerjee ND, Pawar S, Pawar P. Current perspectives on cleaning validation in the pharmaceutical industry: a scientific and risk-based approach. Int J Pharm Phytopharm Res 2011;1:8-16.
Kumar S, Bharat P. A review on the concept of cleaning validation in pharmaceutical industry. Int Res J Pharm 2012;3:17-9.
Waghmare PV, Chinchole AS, Poul BN, Bhusnure OG. A brief review on cleaning validation and its significance in pharmaceutical industry. Int J Pharm Sci 2013;4:165-92.
Ghosh A, Dey S. Overview of cleaning validation in pharmaceutical industry. Int J Pharm Quality Ass 2010;2:26-30.
APIC. Cleaning validation in active pharmaceutical ingredient manufacturing plant. A guide to Cleaning Validation in API Plants; 1999.
Asgharian R, Hamedani FM, Heydari A. Step by step how to do cleaning validation. Int J Pharm Sci 2014;5:3345-66.
Ravichandran V, Shalini S, Sundram KM, Rajak H. Validation of analytical methods–strategies and importance. Int J Pharm Pharm Sci 2010;2:18-22.
Daksh S, Goyal A, Pandiya CK. Validation of analytical methods–strategies and significance. Int J Res Dev Pharm Sci 2015;4:1489-7.
Lavanya G, Sunil M, Eswarudu MM, Eswaraiah MC, Harisudha K, Naga B. Analytical method validation: an updated review. Int J Pharm Sci Res 2013;4:1280-6.
ICH. Harmonised tripartite guideline, validation of analytical procedures, text and methodology Q2 (R1); 2005.
Geetha G, Karanam NGR, Kumar BV, Raja MG. Analytical method validation: an updated review. Int J Adv Pharm Biol Chem 2012;1:64-71.
Yanamadala G, Gupta VR, Kumar PP, Lavanya N. Cleaning validation for residual determination of valganciclovir hydrochloride on stainless steel surface of pharmaceutical manufacturing equipment using HPLC-Dad method. Int J Res Pharm Chem 2013;3:782-9.
Patel S, Kamath K, Shabaraya R. Evaluation of cleaning method validation techniques of ciprofloxacin. Int J Pharm Chem Sci 2012;1:1118-27.
Sandeep K, Induri MSR, Sudhakar M. Validated spectro-photometric quantification of aripiprazole in pharmaceutical formulations by using the multivariate technique. Adv Pharm Bull 2013;3:469-72.
Kathiresan K, Prathyushal Y, Moorthil C, Sha NAD, Krishnan K, Manavalan R. Cleaning validation of ibuprofen and methocarbamol tablets. Int J Drug Dev Res 2011;3:300-6.
Dhoka MV, Vaidya PD, Pande AV, Arora AA. Development and validation of analytical method for estimation of cefixime in swab samples. Int J Chem Tech Res 2010; 2:1918-23.
Rubashvili I, Karukhnishvili N, Loria K, Dvali N. Cleaning validation for estimation of active ingredients’ residues of vicazid uncoated tablets (pyrantel 100 mg/mebendazole 150 mg) on surfaces of pharmaceutical manufacturing equipment using swab sampling and HPLC method. Int J Pharmacol Pharm Sci 2015;7:158-69.
Ivaturi KV, Yu SK, Mulla U, Reddy M. Method development and validation of cleaning procedure for fenbendazole residual determination in manufacturing. Asian J Plant Res 2016;9:316-29.
www.tabletpress.co.in/tabletpress_mini_singlerotary.html. [Last accessed on 20 May 2016]
Theivarasu C, Ghosh S, Indumathi T. UV spectrophotometric determination of carvedilol in pharmaceutical formulations. Asian J Pharm Clin Res 2010;3:64-8.
https://en.wikipedia.org/wiki/Aripiprazole. [Last accessed on 20 May 2016]
Published
How to Cite
Issue
Section
