3D PRINTING TECHNIQUE: A REVIEW ON THE APPLICATIONS IN PHARMACEUTICAL MANUFACTURING
DOI:
https://doi.org/10.22159/ijpps.2024v16i4.50139Keywords:
3D Printing, Personalized medicineAbstract
In the realm of pharmaceutical manufacturing, 3D printing technology stands on the brink of a transformable revolution. This article passionately explores the boundless potential of 3D printing in shaping the future of pharmaceuticals, aiming to inspire researchers. It delves into crucial aspects: an overview of 3D printings in drug development, its advantages in drug production, and the pivotal role of personalized medicine. The article also discusses the creation of patient-specific medical devices, novel drug delivery systems, and the anticipated challenges in adopting 3D printing. Real-world case studies showcase successful applications while addressing the regulatory challenges associated with 3D-printed pharmaceuticals. By bridging existing knowledge gaps, this comprehensive article acts as a guiding light for those dedicated to advancing pharmaceutical research. It empowers researchers with profound insights into this disruptive technology, fostering innovation and collaboration within the community. The untapped potential of 3D printing in pharmaceuticals is vast and promising. Together, researchers can pioneer the future of pharmaceutical manufacturing, benefiting patients globally and propelling scientific advancement. Join us in this exhilarating journey of exploration and discovery as we harness the full capabilities of 3D printing for the betterment of healthcare and the progress of science.
Downloads
References
Cader HK, Rance GA, Alexander MR, Gonçalves AD, Roberts CJ, Tuck CJ. Water-based 3D inkjet printing of an oral pharmaceutical dosage form. Int J Pharm. 2019;564:359-68. doi: 10.1016/j.ijpharm.2019.04.026, PMID 30978485.
Swathi S, Jyothi N, Jyothi G, Nirmala N, Prashanti N, Lakshmi L. A review on 3d printed tablets. Asian J Pharm Technol Innov. 2016;04(20):34-9.
Jamroz Witold, Szafraniec J, Kurek M, Jachowicz R. 3D printing in pharmaceutical and medical applications-recent achievements and challenges. Pharm Res. 2018;35(9):176. doi: 10.1007/s11095-018-2454-x.
Khaled Shban A, Burley Jonathan C, Alexander Morgan R, Roberts Clive J. Desktop 3D printing of controlled release pharmaceutical bilayer tablets. Int J Pharm. 2014;461(1-2):105-11. doi: 10.1016/j.ijpharm.2013.11.021, PMID 24280018.
Li Q, Guan X, Cui M, Zhu Z, Chen K, Wen H. Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing. Int J Pharm. 2018;535(1-2):325-32. doi: 10.1016/j.ijpharm.2017.10.037, PMID 29051121.
Larush L, Kaner I, Fluksman A, Tamsut A, Pawar AA, Lesnovski P. 3D printing of responsive hydrogels for drug-delivery systems. J 3D Print Med. 2017;1(4):219-29. doi: 10.2217/3dp-2017-0009.
Prasad LK, Smyth H. 3D printing technologies for drug delivery: a review. Drug Dev Ind Pharm. 2016;42(7):1019-31. doi: 10.3109/03639045.2015.1120743, PMID 26625986.
Katstra WE, Palazzolo RD, Rowe CW, Giritlioglu B, Teung P, Cima MJ. Oral dosage forms fabricated by three-dimensional printing. J Control Release. 2000;66(1):1-9. doi: 10.1016/s0168-3659(99)00225-4, PMID 10708873.
Bansal M, Sharma V, Singh G, Harikumar SL. 3D printing for the future of pharmaceutical dosage forms. Int J App Pharm. 2018;10(3):1-7. doi: 10.22159/ijap.2018v10i3.25024.
Goyanes AF, Martorana F, Sedough A, Gaisford D, S Basit A. 3D printing pharmaceuticals for pediatric use. Int J Pharm. 2017;529(1-2):235-42.
Zhang JF, Patil X, Tiwari H, RV Repka MA. Advances in 3D printing of medicinal products. J Pharm Sci. 2019;108(2):1937-55.
Goyanes A, Robles Martinez P, Buanz A, Basit AW, Gaisford S. "3D printing of pharmaceuticals and drug delivery devices". Pharmaceutics. 2019;11(2):84.
Ventola CL. 3D printing in pharmaceutical and medical applications: recent achievements and challenges. Pharm Ther. 2014;39(11):704-11.
Yu DGZ, Branford White LM, Yang CJ, XL Yin XZ. 3D printing in pharmaceuticals: a new tool for medicines development. AAPS PharmSciTech. 2018;19(7):3031-40.
Norman J, Madurawe RD, Moore CMV, Khan MA, Khairuzzaman. A new chapter in pharmaceutical manufacturin: g: 3D printing drug products. Adv Drug Deliv Rev. 2017 Jan 1:108:39-50. doi: 10.1016/j.addr.2016.03.001, PMID 27001902.
Abrahams E. Right drug-right patient-right time: personalized medicine coalition. Clin Transl Sci. 2008;1(1):11-2. doi: 10.1111/j.1752-8062.2008.00003.x, PMID 20443813.
Crommelin DJA, Bouwman Boer Y. Pharmacy preparations: back in the limelight? Pharmacists make up your mind. Int J Pharm. 2016;514(1):11-4. doi: 10.1016/j.ijpharm.2016.09.031, PMID 27863653.
Jamroz W, Szafraniec J, Kurek M, Jachowicz R. 3D printing in pharmaceutical and medical applications-recent achievements and challenges. Pharm Res. 2018;35(9):176. doi: 10.1007/s11095-018-2454-x, PMID 29998405.
Srinivas L, Jaswitha M, Manikanta V, Bhavya B, Himavant BD. 3D printing in pharmaceutical technology: a review. Int Res J Pharm. 2019;10(2):8-17. doi: 10.7897/2230-8407.100234.
Beer Nett, Hegge Ingrid, Kae Susanne, De Brin Marie Louise ML, Te Genina Natalja, Resa Leonardo Alves, Joelle Hoebert, Sofia Kalvemark Sporrong. Scenarios for 3D printing of personalized medicines-a case study. ELSEVIER; 2021. p. 1-9.
Smith AR, Johnson ET. The transformative roel of 3D printing in personalized medicine. J Pers Med. 2023;13(3):235.
Anderson JM, Williams LK. Advantages and challenges of personalized medicines in contemporary healthcare. J Pers Med. 2022;14(1):45.
Bizzotto N Tami I, Santucci A. "3D Printing and medical imaging. A Review of the method and application. Medical 3D Printing. 2019;5(1):1-9.
Rengier F, Mehndiratta A, Von Tengg Kobligk H, Zechmann CM, Unterhinninghofen R, Kauczor HU. 3D printing based on imaging data: review of medical applications. Int J Comput Assist Radiol Surg. 2010;5(4):335-41. doi: 10.1007/s11548-010-0476-x, PMID 20467825.
Tamimi A. Skallal MS, Ahmad A. "3D printing prosthetic implants". J Mech Behav Biomed Mater. 2019;90:411-24.
Caballero M, Barsoum WK, Higuera CA. "Advances in personalized arthroplasty: implementation of 3D printing technology". J Arthroplasty. 2021;36(5):1745-53.
Diment LE, Thompson MS, Bergmann JHM Thompson. Clinical efficacy and effectiveness of 3D printing: a systematic review. BMJ Open. 2017;7(12). doi: 10.1136/bmjopen-2017-016891.
Rhee YSK, Kim JH. Clinical application of three-dimensional printing technology in craniofacial plastic surgery. Arch Plast Surg. 2016;43(3):267-75.
Mazzoli A. Selective laser sintering in biomedical engineering. Med Biol Eng Comput. 2013;51(3):245-56. doi: 10.1007/s11517-012-1001-x, PMID 23250790.
Tappa K, Jammalamadaka U, Mills DK. "Recent advances in biomaterials for 3D printing and tissue engineering". Journal of Function Biomaterials. 2018;9(1):22.
Mahan J, Selzer DF, Henry T, Bariteau J. 3D printing and orthopedic: a review of surgical applications. Med Devices Evid Reaserch. 2020;13:333-42.
Hussain A, Soon CF, Yeong WY. "3D bioprinting of biomaterials for tissue engineering applications. Mater Sci Eng. 2017;78:1263-75.
Che MP, Rozen WM, McMenamin PG. Emerging applications of bedside 3D printing in plastic surgery. Front Surg. 2018;5:1.
Visscher DO, Farivar RS, Thorne CH. "Cost analysis of digital templating versus 3D printed patient-specific instrumentation in proximal humerus fracture fixation". J Orthop Surg Res. 2020;15(1):1-6.
Kotta Sabna, Nair Anroop, Alsabeelah Nimer. 3D printing technology in drug delivery: recent progress and application. Curr Pharm Des. 2018;24(42):5039-48. doi: 10.2174/1381612825666181206123828, PMID 30520368.
Mahmood Muhammad A. ’3D printing in drug delivaery and biomedical applications: a state of the art review. MDPI. 2021;1(3):94-115.
APRECIA. The 3DP pharmaceutical company” Aprecia Pharmaceuticals. 2018. Available from: https://www.aprecia.com.
FabRxs. FabRxs pharmaceutical 3D printing for personalised medicines; 2020. Available from: https://www.fabrx.co/fabrxs-pharmaceutical-3d-printer-for-personalised-medicines-m3dimaker-is-now-available. [Last accessed on 28 Feb 2024]
Ventolin. Ventolin (Salbutamole) information GlaxoSmithKline UK Limited; 2022. Available from: https://public.gsk.co.uk/products/ventolin.html. [Last accessed on 22 Jul 2022]
Wang Shanshan, Chen Xuejun, Han Xiaolu, Hong Xiaoxuan, Xiang LI, Zhang Huri. ’A review of 3D printing technology in pharmaceuticals: technology and applications, now and future. MDPI. 2023;15(2):416.
Mule Shrikrishna Shrikrishna T, Bhusnure Omprakash, Waghmare SS, Mali Mamta R. Recent tends, opportunit6ies and challenges in 3D printing technology for personalize medicine. J Drug Ther. 2020;10(4):242-52.
Cui M, Pan H, Su Y, Fang D, Qiao S, Ding P. Opportunities and challenges of three-dimensional printing technology in pharmaceutical formulation development. Acta Pharm Sin B. 2021;11(8):2488-504. doi: 10.1016/j.apsb.2021.03.015, PMID 34567958.
Balfour H. 3D printing-current pharmaceutical application and future directions; 2021. Available from: https://www.europeanpharmaceuticalreview.com/article/162544/3d-printing-current-pharmaceutical-applications-and-future-directions/. [Last accessed on 05 Jun 2022]
Gross BC, Erkal JL, Lockwood SY, Chen C, Spence DM. Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. Anal Chem. 2014;86(7):3240-53. doi: 10.1021/ac403397r, PMID 24432804.
Belhabib S, Guessasma S. Compression performance of hollow structures: from topology optimisation to design 3D printing. Int J Mech Sci. 2017;133:728-39. doi: 10.1016/j.ijmecsci.2017.09.033.
Jamroz W, Szafraniec J, Kurek M, Jachowicz R. 3D Printing in pharmaceutical and medical applications-recent achievements and challenges. Pharm Res. 2018;35(9):176. doi: 10.1007/s11095-018-2454-x, PMID 29998405.
Jimenez M, Romero L, Dominguez IA, Del Mar Espinosa, Dominguez M. "Additive manufacturing technology: an overview about 3D printing methods and future prospects. Complexity. 2019:1-30.
Trenfield SJ, Awad A, Madla CM, Hatton GB, Firth J, Goyanes A. Shaping the future: recent advances of 3D printing in drug delivery and healthcare. Expert Opin Drug Deliv. 2019;16(10):1081-94. doi: 10.1080/17425247.2019.1660318, PMID 31478752.
Jacob S, Nair AB, Patel V, Shah J. 3D printing technologies: recent development and emerging applications in various drug delivery systems. AAPS PharmSciTech. 2020;21(6):220. doi: 10.1208/s12249-020-01771-4, PMID 32748243.
Matai I, Kaur G, Seyedsalehi A, McClinton A, Laurencin CT. Progress in 3D bioprinting technology for tissue/organ regenerative engineering. Biomaterials. 2020;226:119536. doi: 10.1016/j.biomaterials.2019.119536, PMID 31648135.
Mancilla-De-la-Cruz J, Rodriguez Salvador M, An J, Chua CK. Three-dimensional printing technologies for drug delivery applications: processes, materials, and effects. Int J Bioprint. 2022;8(4):622. doi: 10.18063/ijb.v8i4.622, PMID 36404786.
Published
How to Cite
Issue
Section
Copyright (c) 2024 ABHISHEK YADAV, MANISH YADAV, ASHISH KUMAR YADAV, SHWETA MISHRA, JITENDRA JENA, JITENDRA KUMAR RAI
This work is licensed under a Creative Commons Attribution 4.0 International License.
