SYNERGISTIC EFFECT OF CHITOSAN AND NANOCRYSTALLINE CELLULOSE ON THE ANTIMICROBIAL ACTIVITY OF ELECTROSPUN POLYLACTIC ACID (PLA) NANOFIBERS
DOI:
https://doi.org/10.22159/ijap.2026v18i4.57784Keywords:
Antimicrobial activity, Chitosan, Nanocrystalline cellulose, Electrospinning, Polylactic acid, NanofibersAbstract
Objective The world is accelerating to find alternative antimicrobial materials due to the rapid development of antibiotic-resistant bacteria. Electrospinning of polymeric nanofibers can provide an attractive platform of developing bioactive surfaces with improved antibacterial functionality. Purpose: The research aimed to determine how the molecular weight of chitosan as well as the incorporation of nanocrystalline cellulose (NCC) affected the morphology and antibacterial activity of polylactic acid (PLA)-based electrospun nanofibers.
Methods: Nanofibers were prepared through needle electrospinning method. The morphological properties of the prepared nanofibers were determined by the use of the scanning electron microscopy (SEM). PLA was blended with two molecular weights of chitosan (7.5kDa and 15 kDa) in 8.5wt% concentration with or without NCC in the concentration of 8.5 wt% as well. The ASTM E2149-13a dynamic contact method was used to assess the anti-bacterial action against Bacillus cereus, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli.
Results: Results showed that the low molecular weight chitosan (7.5 kDa) formed smooth and uniform nanofibers (average diameter =169-180 nm), and chitosan of high molecular weight (15 kDa) formed beads with less homogeneous structures. Formulations with chitosan showed good antibacterial properties with growth inhibition of most strains tested being complete or almost complete in 1 hour. When NCC was added, there was an improvement in the fiber morphology and an increase inits antibacterial activity, especially with the 7.5 kDa chitosan formulation, which is indicating a synergist effect. In comparison, PLA or PLA/NCC fibers in the absence of chitosan exhibited low or ineffective antibacterial activity.
Conclusion: The optimized Cs/NCC/PLA nanofibers, especially the one that contained low molecular weight chitosan, had a smoother and more uniform nanofibers and high spectrum antibacterial activity. The combination of chitosan and NCC boosts surface activity and membrane disruption of bacteria, which points to the possibility of using these composite nanofibers in biomedical applications as wound dressings and antimicrobial coating.
References
1. Tängdén T, Carrara E, Hellou MM, Yahav D, Paul M. Introducing new antibiotics for multidrug-resistant bacteria: obstacles and the way forward. Clin Microbiol Infect. 2025;31(3):354–59. doi: 10.1016/j.cmi.2024.09.025.
2. Ahmed SK, Hussein S, Qurbani K, Ibrahim RH, Fareeq A, Mahmood KA, et al. Antimicrobial resistance: impacts, challenges, and future prospects. J Med Surg Public Health. 2024;2:100081. doi: 10.1016/j.glmedi.2024.100081.
3. Hemeg HA. Nanomaterials for alternative antibacterial therapy. Int J Nanomed. 2017;12:8211–25. doi: 10.2147/ijn.s132163.
4. AlQurashi DM, AlQurashi TF, Alam RI, Shaikh S, Tarkistani MAM. Advanced nanoparticles in combating antibiotic resistance: current innovations and future directions. Nanotheranostics. 2025;6(2):9. doi: 10.3390/jnt6020009.
5. Hans R, Talukdar S, Tyagi P. Blended polymeric nanofibres for antimicrobial activity. J Chem Health Risks. 2025;15(4):2661–68.
6. Morie A, Garg T, Goyal AK, Rath G. Nanofibers as novel drug carrier — an overview. Artif Cells NanomedBiotechnol. 2016;44(1):135–43. doi: 10.3109/21691401.2014.927879.
7. Duan X, Chen HL, Guo C. Polymeric nanofibers for drug delivery applications: a recent review. J Mater Sci Mater Med. 2022;33(12):78. doi: 10.1007/s10856-022-06700-4.
8. Al-Enizi AM, Zagho MM, Elzatahry AA. Polymer-based electrospun nanofibers for biomedical applications. Nanomaterials. 2018;8(4):259. doi: 10.3390/nano8040259.
9. Desai N, Rana D, Salave S, Gupta R, Patel P, Karunakaran B, et al. Chitosan: a potential biopolymer in drug delivery and biomedical applications. Pharmaceutics. 2023;15(4):1313. doi: 10.3390/pharmaceutics15041313.
10. Yilmaz Atay H. Antibacterial activity of chitosan-based systems. Funct Chitosan. 2020:457. doi: 10.1007/978-981-15-0263-7_15.
11. Li B, Qiu L, Zhang J, Liu S, Xu M, Wang J, et al. Solubilization of chitosan in biologically relevant solvents by a low-temperature solvent-exchange method for developing biocompatible chitosan materials. Int J Biol Macromol. 2024;254:127950. doi: 10.1016/j.ijbiomac.2023.127950.
12. Yacob N, Talip N, Mahmud M, Idayu-Mat-Sani NA, Samsuddin NA, Ahmad Fabillah N. Determination of viscosity-average molecular weight of chitosan using intrinsic viscosity measurement. J NuclRelat Technol. 2013;10:39–44.
13. Syed MH, Khan MMR, Abdullah N, Zahari MAMK. Effect of drug loading on sustained release through needleless electrospun nanocellulose/chitosan/polylactic acid based drug delivery system. Int J Biol Macromol. 2025;329:147843. doi: 10.1016/j.ijbiomac.2025.147843.
14. Jeevitha D, Amarnath K. Chitosan/PLA nanoparticles as a novel carrier for the delivery of anthraquinone: synthesis, characterization and in vitro cytotoxicity evaluation. Colloids Surf B Biointerfaces. 2013;101:126–34. doi: 10.1016/j.colsurfb.2012.06.019.
15. da Silva D, Kaduri M, Poley M, Adir O, Krinsky N, Shainsky-Roitman J, et al. Biocompatibility, biodegradation and excretion of polylactic acid (PLA) in medical implants and theranostic systems. Chem Eng J. 2018;340:9. doi: 10.1016/j.cej.2018.01.010.
16. Santoro M, Shah SR, Walker JL, Mikos AG. Poly(lactic acid) nanofibrous scaffolds for tissue engineering. Adv Drug Deliv Rev. 2016;107:206. doi: 10.1016/j.addr.2016.04.019.
17. Mendonça CJA, Dantas LR, Soni JF, Tuon FF. Antimicrobial action of a biodegradable thermoplastic impregnated with vancomycin for use in 3D printing technology. Braz Arch Biol Technol. 2024;67:e24231110. doi: 10.1590/1678-4324-2024231110.
18. Moya-Lopez C, González-Fuentes J, Bravo I, Chapron D, Bourson P, Alonso-Moreno C, et al. Polylactide perspectives in biomedicine: from novel synthesis to application performance. Pharmaceutics. 2022;14(8):1673. doi: 10.3390/pharmaceutics14081673.
19. Bischof S, Bušac T, Ivanković T, Rolland du Roscoat S, Lukic B, Kovačević Z. PLA-based green antimicrobial and flame-retardant biocomposites reinforced with Sida hermaphrodita fibers. Coatings. 2025;15(5):595. doi: 10.3390/coatings15050595.
20. Trache D, Tarchoun AF, Derradji M, Hamidon TS, Masruchin N, Brosse N, et al. Nanocellulose: from fundamentals to advanced applications. Front Chem. 2020;8:535734. doi: 10.3389/fchem.2020.00392.
21. George J, Sabapathi SN. Cellulose nanocrystals: synthesis, functional properties, and applications. Nanotechnol Sci Appl. 2015;8:45. doi: 10.2147/nsa.s64386.
22. Zhang Y, Liu Y, Li R, Ren X, Huang TS. Preparation and characterization of antimicrobial films based on nanocrystalline cellulose. J Appl Polym Sci. 2019;136(8):47101. doi: 10.1002/app.47101.
23. Alavi M. Modifications of microcrystalline cellulose (MCC), nanofibrillated cellulose (NFC), and nanocrystalline cellulose (NCC) for antimicrobial and wound healing applications. E-Polymers. 2019;19(1):103–19. doi: 10.1515/epoly-2019-0013.
24. Shao L, Xi Y, Weng Y. Recent advances in PLA-based antibacterial food packaging and its applications. Molecules. 2022;27(18):27185953. doi: 10.3390/molecules27185953.
25. Goy RC, De Britto D, Assis OBG. A review of the antimicrobial activity of chitosan. Polimeros. 2009;19(3):241–47. doi: 10.1590/s0104-14282009000300013.
26. Kargarzadeh H, Huang J, Lin N, Ahmad I, Mariano M, Dufresne A, et al. Recent developments in nanocellulose-based biodegradable polymers, thermoplastic polymers, and porous nanocomposites. Prog Polym Sci. 2018;87:197–227. doi: 10.1016/j.progpolymsci.2018.07.008.
27. Norizan MN, Shazra SS, Alias AH, Sabaruddin FA, Muhammad RA, Zainudin ES, et al. Nanocellulose-based nanocomposites for sustainable applications: a review. Nanomaterials. 2022;12(19):3483. doi: 10.3390/nano12193483.
28. AlJbour ND, Hossen Beg MD, Gimbun J, Zahari MA. Fabrication of blended chitosan nanofibers by the free surface wire electrospinning. Pharmacia. 2023;70(3):465–73. doi: 10.3897/pharmacia.70.e98122.
29. Woskowicz E, Łożyńska M, Kowalik-Klimczak A, Kacprzyńska-Gołacka J, Osuch-Słomka E, Piasek A, et al. Plasma deposition of antimicrobial coatings based on silver and copper on polypropylene. Polimery. 2020;65(1):33–43. doi: 10.14314/polimery.2020.1.5.
30. Dumitrescu I, Iordache OG, Mocioiu AM, Nicula G. Antimicrobial functionalization of textile materials with hydrophobins and Ag/ZnO composite nanopowders. Ind Textila. 2013;64(6):303–12.
31. Koski A, Yim K, Shivkumar S. Effect of molecular weight on fibrous PVA produced by electrospinning. Mater Lett. 2004;58(3–4):493–97. doi: 10.1016/s0167-577x(03)00532-9.
32. Deitzel JM, Kleinmeyer J, Harris D, Beck Tan NC. The effect of processing variables on the morphology of electrospun nanofibers and textiles. Polymer. 2001;42(1):261–72. doi: 10.1016/s0032-3861(00)00250-0.
33. Qun G, Ajun W. Effects of molecular weight, degree of acetylation and ionic strength on surface tension of chitosan in dilute solution. Carbohydr Polym. 2006;64(1):29–36. doi: 10.1016/j.carbpol.2005.10.026.
34. Tsaih ML, Chen RH. Effect of molecular weight and urea on the conformation of chitosan molecules in dilute solutions. Int J Biol Macromol. 1997;20(3):233–40. doi: 10.1016/s0141-8130(97)01165-3.
35. Aljbour ND. Electrospun nanofibers of chitosan/nanocrystalline cellulose/polylactic acid with improved morphology and distribution. J Phys Conf Ser. 2025;3003(1):012002. doi: 10.1088/1742-6596/3003/1/012002.
36. Kiskó G. Natural control of food-borne pathogens using chitosan. 2025;13. [Book reference — publisher info missing]
37. Akdaşçi E, Duman H, Eker F, Bechelany M, Karav S. Chitosan and its nanoparticles: a multifaceted approach to antibacterial applications. Nanomaterials. 2025;15(2):126. doi: 10.3390/nano15020126.
38. Syed MH, Khan MMR, Zahari MA, Hossen Beg MD, Abdullah N. Developing of nanocellulose loaded chitosan-polylactic acid biofilms for green food packaging. Green Mater. 2024. doi: 10.1680/jgrma.24.00057.
39. Guarnieri A, Triunfo M, Scieuzo C, Ianniciello D, Tafi E, Hahn T, et al. Antimicrobial properties of chitosan from different developmental stages of the bioconverter insect Hermetiaillucens. Sci Rep. 2022;12(1):8084. doi: 10.1038/s41598-022-12150-3.
40. Nikaido H, Vaara M. Molecular basis of bacterial outer membrane permeability. Microbiol Rev. 1985;49:1–32.
41. Asaftei M, Lucidi M, Cirtoaje C, Holban AM, Charitidis CA, Yang F, et al. Fighting bacterial pathogens with carbon nanotubes: focused review of recent progress. RSC Adv. 2023;13(29):19682–94. doi: 10.1039/d3ra01745a.
42. Hosseinnejad M, Jafari SM. Evaluation of different factors affecting antimicrobial properties of chitosan. Int J Biol Macromol. 2016;85:467–75. doi: 10.1016/j.ijbiomac.2016.01.022.
43. Samokhin Y, Varava Y, Diedkova K, Yanko I, Korniienko V, Husak Y, et al. Electrospun chitosan/polylactic acid nanofibers with silver nanoparticles: structure, antibacterial, and cytotoxic properties. ACS Appl Bio Mater. 2025;8(2):1027–37. doi: 10.1021/acsabm.4c01252.
44. Deng Y, Pan J, Yang X, Yang S, Chi H, Yang X, et al. Dual roles of nanocrystalline cellulose extracted from jute (Corchorus olitorius L.) leaves in resisting antibiotics and protecting probiotics. Nanoscale Adv. 2023;5(23):6435–48. doi: 10.1039/d3na00345k.
45. Colli-Gongora PE, Moo-Tun NM, Herrera-Franco PJ, Valadez-Gonzalez A. Assessing the effect of cellulose nanocrystal content on the biodegradation kinetics of multiscale polylactic acid composites under controlled thermophilic composting conditions. Polymers. 2023;15(14). doi: 10.3390/polym15143093.
46. Asadzadeh F, Ghorbanzadeh S, Poursattar Marjani A, Gholami R, Asadzadeh F, Lotfollahi L. Assessing polylactic acid nanofibers with cellulose and chitosan nanocapsules loaded with chamomile extract for treating gram-negative infections. Sci Rep. 2024;14(1):22336. doi: 10.1038/s41598-024-72398-9.
Published
How to Cite
Issue
Section
Copyright (c) 2026 SUHA M. ABUDOLEH
This work is licensed under a Creative Commons Attribution 4.0 International License.